BLACKFAST 551 CONDITIONER
 


USE:
10% solution in water.

APPLICATION: Hardened steels and cast iron may not require conditioning but for the majority and especially mild steel, the use of Blackfast 551 results in a homogenous surface ready for blacking. After degreasing (and pickling if necessary) steels are clean but usually exhibit surface variations which, if not treated, can result in uneven blacked surfaces. Immersion for 1 - 2 minutes in a 10% solution of Blackfast 551 in water, prepares the surface so that consistent blacking is achieved. Immersion for a longer period is not recommended since over-conditioning leads to inconsistent blacking and patchy results.

TANK MATERIAL: Tanks should be of a suitable polypropylene.

Blackfast 551 conditioner is part of the Blackfast range of products for the chemical blacking of iron and steel at room temperature.

Blackfast Chemicals continues to improve the quality and performance of its range of products and reserves the right to modify product formulations without prior notice.

SAFETY DATA:

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY

PRODUCT NAME: BLACKFAST 551 CONDITIONER
APPLICATION: Surface preparation of iron and steel
COMPANY: Blackfast Chemicals
ADDRESS: 78 Coombe Road, New Malden, Surrey KT3 4QS, England
TEL/FAX NO’S: Tel: 0181-336 2900 Fax: 0181-336 0909

2. COMPOSITION/INFORMATION ON INGREDIENTS

COMPOSITION: Aqueous solution of inorganic/organic salts.
HAZARDS INGREDIENTS: None
SYMBOL: Xi
RISK PHRASES: None

3. HAZARDS IDENTIFICATION

Irritant

4. FIRST AID MEASURES

INHALATION: Remove to fresh air.
INGESTION: Gargle, rinse mouth and drink large amounts of water. Seek immediate medical aid.
SKIN: Remove contaminated clothing. Wash well with plenty of water. If irritation develops, seek medical aid.
EYES: Flush with clean water immediately for 10 minutes. Seek medical aid.

5. FIRE FIGHTING MEASURES

Non flammable. Will not support combustion.
Decomposition products: Oxides of Carbon, Phosphorus, Nitrogen.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS:: When dealing with a spill note the recommendations in Section 7.
ENVIRONMENTAL: Prevent entry into drains, sewers and water courses.
SPILLAGE: Absorb liquid in absorbent clay granules.

7. HANDLING AND STORAGE

Avoid inhaling the vapour. Avoid contact with skin and eyes. Store in clean, dry conditions. Keep container closed and ensure label intact and legible. Prevent from freezing.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Occupational Exposure Limits: None.
Cover working solution when not in use. Local exhaust ventilation is recommended when in continuous use.
Personal protection: Wear impervious (PVC) gloves, eye protection and plastic apron. Remove contaminated clothing immediately.

9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: Colourless liquid
SPECIFIC GRAVITY: 1.10 @ 20oC
SOLUBILITY/MISCIBILITY IN WATER: Complete
FLASH POINT: N/A
pH: 2.5 - 3.0

10. STABILITY AND REACTIVITY

Solution is stable under normal conditions.

11. TOXICOLOGICAL INFORMATION

May cause irritation to skin and eyes.

12. ECOLOGICAL INFORMATION

Not assessed.

13. DISPOSAL INFORMATION

Disposal must be in accordance with local and national legislation. Dispose through an authorised waste contractor to a licensed site.

14. TRANSPORT INFORMATION

No special precautions are necessary.

15. REGULATORY INFORMATION

HAZARDOUS INGREDIENTS: None
SYMBOL (not obligatory): XI
RISK PHRASES (not obligatory): Irritating to eyes.
SAFETY PHRASES (not obligatory): In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
STATUTORY INSTRUMENTS:
Health and Safety at Work Act 1974. Chemicals (Hazard Information and Packaging) Regs 1993 (Si 1746). Control of Substances Hazardous to Health Regs 1988 (Si 1657). Environmental Protection Act 1990.
CODES OF PRACTICE:
Classification and labeling substances dangerous for supply (COP 22). Waste management: The duty of care.
GUIDANCE NOTES:
Occupational exposure limits (EH 40). Classification, Packaging and Labeling of Dangerous Substances Regs. 1984 HS(R)22.

16. OTHER INFORMATION

Read the application Data Sheet before using this or any Blackfast product. The product is intended for the stated use only. Do not use the product for any other application without obtaining advice from us beforehand.
If this product is-for resale, ensure that the purchaser receives a copy of this information.
If this product is for end use, ensure that your employees and others who may be affected are aware of the contents of this sheet.

 
back to top
Tel 02 9834 6034 - Fax 02 9834 6105 - Email for info sales@asteg.com

Sales Office: 134 Pine Creek Circuit, St Clair NSW 2759 Sydney (Aust)
Warehouse: Unit 3008 / 2 Zeleny Rd Minchinbury NSW Sydney (Aust)

home | about us | news | specials | faq | contact us | search
Prices shown exclude GST and are subject to change without notice.
© Asteg Sales 2002.